Bowls

"Bowls are necessary when you have to automatically or individually guide and feed parts such as: bearings, nails, beads, pins, rivets and screws.

The width and the pitch of the internal helical track are already predetermined.

Output of the pieces from the bowl may be by continuous or timed flows.

If necessary, the bowls can be internally coated to meet noise limits set by law.

Rotation direction can be clockwise and counterclockwise."

Conical bowl design
TYPE b Hb Ib D H M c1 c2 Hc Propeller Pitch H max H of service CAPACITY (Kg) INPUT (VA)
0/6000 137 147 90 20 15 M6 130 200 74 8 20 221 207 0.5 45
1/6000 175 183 125 25 20 M6 200 300 110 15 30 293 274.5 2 195
2/6000 220 198 120 30 20 M8 250 420 159 20 40 357 324 5 280

CYLINDRICAL BOWLS

Cylindrical bowls

The bowls can be made of:

- painted steel;

- stainless steel.

They can be coated when necessary to meet the noise limits set by law.

The width and the pitch of the internal helical track are established according to the piece to be fed.

Special bowls are designed and constructed to satisfy specific needs.

CONICAL BOWLS

Conical bowls

The bowls can be made of:

- painted steel;

- stainless steel.

They can be coated when necessary to meet the noise limits set by law.

The width and the pitch of the internal helical track are established according to the piece to be fed.

Special bowls are designed and constructed to satisfy specific needs.

STEPPED BOWLS

Stepped bowls

The bowls can be made of:

- painted steel;

- stainless steel.

They can be coated when necessary to meet the noise limits set by law.

The width and the pitch of the internal helical track are established according to the piece to be fed.

Special bowls are designed and constructed to satisfy specific needs.

close

STEPPED BOWLS IN CAST ALUMINIUM

Cast aluminium bowls

STEPPED BOWLS IN CAST ALUMINIUM

Article: Stepped bowls in cast aluminium are used for automatic or individual aligning and feeding and are especially suitable for bushings, nails, grains, pins, rivets and screws.

The width and the pitch of the internal helical track are already predetermined.

The output of the pieces from the bowls can have a continuous or timed flow.

The bowls can be internally coated if they are required to stay within the noise levels established by law.

Rotation can be clockwise or counter-clockwise.

Conical bowl model
Aluminum stepped bowl manufacture
aluminium bowls
Share by: